CASELLA CEL CEL-490 Uživatelský manuál stáhnout pdf (Strana 42)

CEL-63x Environmental Noise Meter

42 Casella CEL

The printed report includes the optional user logo; the run start date and

time and duration; and the instrument setup and calibration data. This is

followed by the cumulative or period broadband and narrowband results

and then by the Location, Operator and Signature fields which can be filled

in by the user.

NOTE

The functions printed in the report (and displayed on the results screens) are those that

are defined in the current measurement setup. The printing of octave and 1/3-octave

results can use considerable amounts of printer paper, especially if a number of

different periods are printed.

Up to five functions are printed for each set of frequency bands, so if Octave Leq +

Max is enabled then selecting more than three Ln functions in the current

measurement setup will require two sets of frequency bands to be printed, using more

paper. Disabling both Octave options above just prints a broadband set of results.

Print Screens

This mode captures the current result screen and prints a graphical copy of this

screen to the printer.

While displaying the Memory results screen, select the View icon (instead of the

Printer icon) and use the keys to select each screen of the current runs results.

Press the Run/Stop key when you want to print the current screen.

This printing format is particularly useful when displaying octave or 1/3-octave

results when the graphical bar graph of the spectrum can be printed for any of

the selected narrow band functions.

Any mix of print reports and result screens can be printed.

Printer set-up

It is necessary to set up the printer (-CMC73) before using it for the first time.

NOTE

Refer to the User and Programming manuals for the -CMC73 on the CD which is

supplied with the printer for details on setting the dip switches and the RS232 protocol.

The -CMC73 printer dip switches SW1, SW2, SW3 and SW4 should ALL be in

the OFF position, which selects the following options:

wide paper roll (78 mm)

ESC/POS mode

Hardware handshaking

Normal operation

The -CMC73 uses the following RS232 settings when used with a CEL-63x:

115200 baud

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 77 78

Žádné komentáře

CASELLA CEL CEL-490 Uživatelský manuál Strana 42