Casella-cel CEL-440 Uživatelský manuál stáhnout pdf (Strana 6)

Chapter ................... Page

4.5.2 Replay ........................ 52

5. SPECIFICATION . . . . . . . . . . . . . . . . . . 55

5.1 CEL-440 ....................... 55

5.2 CEL-480 ....................... 61

5.3 Filter Scanning ................... 62

5.4 Compliance ................... 66

6. PARTS & WARRANTY . . . . . . . . . . . . . . 67

6.1 Schedule of Parts .................. 67

6.2 Instrument Servicing & Warranty .......... 68

Getting Started

The following steps are suggested to get your CEL-440 or CEL-480

started.

1. Refer to Sections 1.1 and 1.2 to learn what is shown on the

display and how to use the Quick Edit function.

2. Install the microphone, preamplifier and batteries according to

Section 1.3.

3. Switch the instrument ON and follow the preliminary messages

as described in Section 1.4.

The messages indicate the instrument type and version.

4. Check “Hints for using Menus” between Chapters 1 and 2.

5. Select the display language and microphone response according

to Section 2.1.

6. Perform an acoustic calibration check as detailed in Section 2.2.

7. Select a bandwidth, run timing and pre-set measurement set-up

according to Chapter 3.

8. Start measurement and data logging as described in Section 4.1.

9. Recall stored data (and print) it according to Section 4.2.

10. Record data on a tape or DAT recorder and replay it as described

in Section 4.5.

Contents

1 2 3 4 5 6 7 8 9 10 11 ... 69 70

Žádné komentáře

Casella-cel CEL-440 Uživatelský manuál Strana 6